Cleaning Cards, Pens, Wipes and Swabs

Waffletechnology™ Thermal Printer Cleaning Card

The concept behind Waffletechnology™ is very simple: achieve complete access to critical components within the equipment. Because optical lenses are rounded and most sensors are recessed, access cannot be achieved through the use of flat cleaning cards. The solution is very simple: design a card that is not flat.

Waffletechnology™ cleaning cards incorporate flexible, raised platforms on their top and bottom surfaces. These cleaning platforms are essentially spring-loaded, significantly increasing the pressure applied to the internal components as the card passes through the mechanism. Not only is cleaning pressure increased, but the platforms actually spring up into surface cavities to clean recessed sensors. Additionally, the leading and trailing surfaces of rounded optical lenses are effectively cleaned. Flat cards do not touch recessed sensors and, at best, only come into contact with the convex tip of a rounded optical lens. As the card is accepted into the mechanism and as it is dispensed by the mechanism, it is cleaning all surfaces.

MSDS

This (3 1/8 x 6) Bixolon Waffletechnology Thermal Printer Cleaning Cards were designed to clean Bixolon’s SRP and SLP printers. Approved and endorsed by Bixolon, this product can prolong the life of the thermal print head if used in a regular maintenance schedule. This product utilizes a scrubbing waffle to gently provide extra cleaning power on the print heads while also cleaning the platen rollers. (Cleaning Card with 3 Cleaning Layers).

MSDS

TransAct Technologies Ithaca 8000/8040 Printer Cleaning Cards are designed to remove burnt-on contaminants from the print head within Ithaca® 8000/8040 Linerless Label and Receipt Printers. Frequent use of this cleaning card with keep the print on your labels and receipts clean and legible.

MSDS

This product is designed to maintain the clarity and readability of cashless tickets printed by Transact’s Epic 950® and 850® Ticket Printers. This two step Cleaning System has both a Cleaning Card to remove burnt on particles within the printer and a Blotter Card to remove excess moisture and contaminates.

MSDS

The New Waffletechnology Thermal Printer Cleaning Cards with Wonder Solvent IPA Free Cleaning Solution was designed for the most superior clean. Waffletechnology raised & spring loaded platforms are used to reach the Print Heads leading edge and provide enough tension to rotate the platen for a full circumference clean. IPA Free solution proves better for cleaning the entire print head, platen rollers and rubber components. Does not dry belts and drive rollers. (Cleaning Card with 3 Cleaning Layers).

MSDS

The New Waffletechnology Thermal Printer Cleaning Cards with Wonder Solvent IPA Free Cleaning Solution was designed for the most superior clean. Waffletechnology raised & spring loaded platforms are used to reach the Print Heads leading edge and provide enough tension to rotate the platen for a full circumference clean. IPA Free solution proves better for cleaning the entire print head, platen rollers and rubber components. Does not dry belts and drive rollers. (Cleaning Card with 1 Cleaning Layer).

MSDS

This cleaning card is designed to remove built-up paper flash and contaminants from the thermal print head within airline boarding pass printers and bag tag printers. Preventive maintenance will keep the printers functioning as it was designed.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS

Thermal Printer Cleaning Cards were developed to provide a preventive maintenance cleaning to remove dirt and debris from print heads. By cleaning your Thermal Printer on a regular basis you are maintaining the print image, extending the life of the print head and will have accurate and readable print/barcode images. Cleaning Card width should be determined by the maximum width of your thermal print head.

MSDS
 

Bixolon Thermal Printer Cleaning Pens are designed for cleaning accessible thermal print heads within Bixolon receipt printers. Regular cleaning will remove debris and contaminants, extending the life of the print head and maintaining a readable image. Use this pen before every media change and during the printing process if visible errors occur. This product is recommended and approved by Bixolon for use on their thermal printers. Cleaning pens are a reusable up to 10 times.

MSDS  MSDS

This dual action cleaning pen is a two-step process designed to remove adhesive build-up, then clean ink, dirt and contaminants from thermal print heads. Use this as a preventive maintenance product to prevent adhesive and debris build-up and keep your thermal printers running as designed.

MSDS

Cleaning Pens designed for cleaning the thermal print heads. This cleaning pen is designed to clean very accessible print heads. Cleaning the print head in a back & forth motion to remove dirt and debris from the print head extending the life of the print head and maintaining a readable image. Excellent for intermittent cleaning during printing process and at time of media change. Cleaning pens are a reusable product.

MSDS

This dual cleaning wipe was design to clean safely any monitor, plasma screen, laptop, PDA, etc. It has one wet wipe for cleaning and a dry wipe to remove moister and remaining residue. Very universal and takes the guess work out of which item is safe for your monitor or equipment cleaning. Will not scratch or leave residue - antistatic property added.

MSDS

Pre-saturated Cleaning Wipes for use when cleaning Optical Lens & Glass surfaces. Will not scratch or leave residue - antistatic property added.

MSDS

Pre-saturated Cleaning Wipes designed for cleaning the thermal print heads. This cleaning wipe is designed to clean the print heads by using a back & fourth motion to remove dirt and debris from the print head extending the life of the print head and maintaining a readable image.

MSDS

Cleaning swabs accurately cleaning the thermal print heads. This cleaning Swab cleans the print head by using a back & fourth motion to remove dirt and debris from the print head extending the life of the print head and maintaining a readable image. Excellent for intermittent cleaning during printing process and at time of media change. This cleaning swabs is reusable - please be careful not to over use this product.

MSDS

Cleaning swabs accurately cleaning the thermal print heads. This cleaning Swab cleans the print head by using a back & fourth motion to remove dirt and debris from the print head extending the life of the print head and maintaining a readable image. Excellent for intermittent cleaning during printing process and at time of media change. This cleaning swabs is reusable - please be careful not to over use this product.

MSDS

This product, with its compact foam tip, is designed to clean the tops and in-between keys of multiple sizes and shapes. When used they will: Clean debris from the keys surface, between the keys and around the keys

MSDS

Cleaning swabs accurately cleaning the thermal print heads. This cleaning Swab cleans the print head by using a back & fourth motion to remove dirt and debris from the print head extending the life of the print head and maintaining a readable image. Excellent for intermittent cleaning during printing process and at time of media change. This cleaning swabs is reusable - please be careful not to over use this product.

MSDS

IPA Free solution proves better for cleaning the entire print head, platen rollers and rubber components. Does not dry belts and drive rollers. Cleaning Swabs Accurately clean the thermal print heads. This cleaning swab cleans the print head by using a back and fourth motion to remove dirt & debris from the print head extending the life of the print head and maintaining the readable print image. Also safe to clean the rubber platen rollers and drive rollers.

MSDS

These swabs, pre-saturated with EZ-Off solution, are designed to remove label adhesive from hard surfaces. Ideal for Print heads that use linerless paper which tends to transfer an adhesive build-up over time. Use in conjunction with a cleaning card, pen or wipe to maintain your thermal printers.