|
HIGH
MARK
General Purpose Wax Thermal Transfer Ribbons
|
- Resin enhanced wax ribbon
- Outstanding durability for a general purpose wax ribbon
- Excellent print quality for normal and rotated bar codes
and small characters
- Reduced printhead energy requirements extend printhead
life
- Prints well at high print speeds
|
Applications:
-
General purpose labeling
- Shipping, warehousing, and receiving labeling
- Shelf and bin labeling
- Shipping and address labels
- Retail tag and label applications
- Textile and apparel labeling
- Compliance labeling |
Recommended Media:
- Coated paper tag and label stock
- Polyethylene films
- Polypropylene films |
| |
TECHNICAL SPECIFICATIONS
- Film Thickness: 4.5 Microns
- Total Ribbon Thickness: 7.5
Microns
- Transmission Density: 1.45
MacBeth Scale
- Ink Melting Point: 62º C or
144º F
- Recommended Maximum Print
Speed: 12 IPS
|
STAR DIAGRAM
This diagram is representative of High Mark used in general purpose applications
when printing on coated tag and label stocks. Performance ratings are based on a
comparison of ribbons within the general purpose wax category. Scale 1 to 5, 5
being the best.
|
 |
| |
|
STORAGE CONDITIONS
To ensure optimal performance,
please adhere to the following environmental conditions for use, shipping and
storage.
- For optimal print results,
thermal transfer printing should occur in the temperature range of 5º C
(41º F) to 35º C (95º F) at 45% to 85% relative humidity.
- Recommended shipping
conditions for up to one month duration are -5º C (23º F) to
45º C (113º F) at 20% to 85% relative humidity.
- To ensure the ribbon’s
performance, our suggested storage conditions for up to one year duration
are -5º C (23º F) to 40º C (104º F) at 20% to 85%
relative humidity.
|
| Please Note:
Exposing IIMAK Thermal Transfer Ribbons to direct sunlight or moisture will
cause damage to the ribbons. |
