|
PRIME MARK
Premium Wax/Resin Thermal Transfer Ribbons
|
- Designed for today’s new high speed/high resolution printers
- Exceptional print quality for complex label formats - normal, rotated
and two-dimensional bar codes, logos and graphics
- Works well on a wide range of receivers
- Exceptional smudge and scratch resistance
Applications:
- Shipping, warehousing, and receiving labeling
- Shelf and bin labeling
- Compliance labeling
- Textile and apparel applications
- Nursery and lumber applications
Recommended Media:
-Coated paper tag and label stock
-Polyethlene Films
-Polypropylene Films
-Polyester Films
|
TECHNICAL
SPECIFICATIONS
- Film Thickness: 4.5 Microns
- Total Ribbon Thickness: 6.8 Microns
- Transmission Density: 1.10 MacBeth Scale
- Ink Melting Point: 80º C or 176º F
- Recommended Maximum Print Speed: 12 IPS
|
STAR
DIAGRAM
This diagram is representative of Prime Mark used in
premium applications when printing on coated papers and synthetic films.
Performance ratings are based on a comparison of ribbons within the premium
wax/resin category. Scale 1 to 5, 5 being the best.
|
 |
STORAGE CONDITIONS
To ensure optimal
performance, please adhere to the following environmental conditions for use,
shipping and storage.
- For optimal print results, thermal transfer printing should occur in
the temperature range of 5º C (41º F) to 35º C (95º F) at 45%
to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are
-5º C (23º F) to 45º C (113º F) at 20% to 85% relative
humidity.
- To ensure the ribbon’s performance, our suggested storage conditions
for up to one year duration are -5º C (23º F) to 40º C
(104º F) at 20% to 85% relative humidity.
|
|
Please Note: Exposing IIMAK Thermal Transfer Ribbons to
direct sunlight or moisture will cause damage to the ribbons. |
| |
