|
R2-Prime
Premium Wax/Resin Thermal Transfer
Ribbons
|
- Superior smudge and scratch resistance
- Good resistance to IPA and other household cleaners
- Moderate level of steam resistance
Applications:
- Shipping, warehousing, and receiving labeling
- Shelf and bin labeling
- Compliance labeling
- Textile and apparel applications
- Nursery and lumber applications
- Flexible packaging applications
Recommended Media:
- Coated paper tag and label stocks
- Polyethylene films
- Polypropylene films
- Polyester films
|
TECHNICAL SPECIFICATIONS
- Film Thickness: 4.5 Microns
- Total Ribbon Thickness: 7.5 Microns
- Transmission Density: 1.30 MacBeth Scale
- Ink Melting Point: 81º C or 178º F
- Recommended Maximum Print Speed: 8 IPS
|
STAR DIAGRAM
This diagram is representative of R2 Prime used
in premium applications when printing on coated tag and label stocks and
synthetic films. Performance ratings are based on a comparison of ribbons within
the premium wax/resin category. Scale 1 to 5, 5 being the best.
|
 |
STORAGE CONDITIONS
To ensure optimal performance, please adhere to the following
environmental conditions for use, shipping and storage.
- For optimal print results, thermal transfer printing should occur in
the temperature range of 5º C (41º F) to 35º C (95º F) at 45%
to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are
-5º C (23º F) to 45º C (113º F) at 20% to 85% relative
humidity.
- To ensure the ribbon’s performance, our suggested storage conditions
for up to one year duration are -5º C (23º F) to 40º C
(104º F) at 20% to 85% relative humidity.
|
| Please Note: Exposing IIMAK Thermal Transfer Ribbons to
direct sunlight or moisture will cause damage to the ribbons. |
| |
